GEARBOX - Up-Rating Drop Gears

The standard drop gears are fine for practically all road use - almost irrespective of power output. part numbers: DAM9373, C-STR123, C-STR124, C-STR30, C-STR30A, C-STR30T, C-STR30TA, C-STR230, C-STR240, C-STR250 Terminology - Drop Gears - Transfer gears (primary, idler and input gears) Large-bore - Refers to anything based on a 1275-type unit Small-bore - Refers to anything based on 850/998/1098 units Despite what many folk believe - they are more than strong enough, and will perform perfectly well if correctly set up. That means getting the idler and primary gear end floats right, and using new bearings for the idler gear at each re-build. Simply following the methods outlined in the relevant workshop manuals will achieve these simple goals. There are two problems with standard drop gears - the main one is the helical cut of the teeth, the other a very limited selection of ratios. The helical-cut teeth are essentially power absorbing - both from increased metal-to-metal c

Gearbox - Up-rating diffs and FDs

There’s a good selection of straight-cut final FDs available. Examine the FD table, and using information from

'Gearbox - Final dives, standard' and 'Gearbox - Formulae for car speed, etc.'

you can assess which would best suit your usage. Bear in mind that they’re noisy, make sure you select one that’ll fit your diff unit, and also consider that using drop gears will allow fine-tuning of the ratio where necessary. See

'Gearbox - Up-rating drop gears'

Gearbox - Up-rating diffs, FDs and ancillaries.

part numbers: C-BTA166, C-BTA167, DAM6624, BTA101, 2A7062, DAM5071, DAM6027, RPS1418, C-AJJ3385, C-22A1731, ...Read more

GEARBOX - Limited Slip Diffs, what's available.

‘Salisbury’ is the word banded about by most un-enlightened folk when discussing LSDs for Minis, mistakenly believing the word covers all Mini orientated LSDs. This is grossly incorrect. Terminology - LSD - Limited Slip Differential The ‘Salisbury’ was designed in the ‘50s at a time when racecars were a good deal less sophisticated than today. Tyres were usually cross-ply with severely limited grip due to poor compounds developed ostensibly for rear-wheel-drive cars; the front wheel drive of the Mini being a rarity. And tracks were more than a little ‘bumpy’. Agriculturally built cars needed an LSD designed along similar lines; enter the Salisbury - effectively developed from a tractor diff. High static pre-loads were more than common to help compensate for severe short-falls in chassis, suspension, and tyre design. To all intents and purposes the diff was practically locked up, making the car a real beast to drive.

Mini Production dates

We have tried to get together as complete list as possible to show all the models made from 1985 onwards, hopefully this will help identify those cars that have been modified over the years. If you have any information that you know is correct or anything that you think is not right please let us know.

Historical Article - Nov 1991 - Five Speed Gearbox

For years people have complained that the Mini required a fifth gear. Although many years ago the idea was tackled by Felday, Coletti Francis and Jack Knight, these gearboxes suffered through being either too complex to make, awkward gear changing or poor reliability.

Historical Article - Nov 1991 - Five Speed Gearbox

For years people have complained that the Mini required a fifth gear. Although many years ago the idea was tackled by Felday, Coletti Francis and Jack Knight, these gearboxes suffered through being either too complex to make, awkward gear changing or poor reliability.

Historical Article - March 1992 - Wild Thing!

In 1988, a humble 1973 Mini 1000 was minding its own business somewhere in London, when along came a young Mini freak called Jason King, who wanted to change it for ever, and make it famous.

Jason persuaded the owner to take £450 for the car, and then proceeded to throw £12,000 worth of presents at it for the next 3 years. Every minute of Jason’s spare time was spent working on his new car and every minute of his working time was spent looking for spares.

Historical Article - March 1992 - R&D Update 5 Speed Gearbox

Have you ever been in that situation where you’ve decided to do something, started it, then a myriad of obstacles suddenly appear making progress snail-slow.

Historical Article - March 1992 - R&D Update 5 Speed Gearbox

Have you ever been in that situation where you’ve decided to do something, started it, then a myriad of obstacles suddenly appear making progress snail-slow.

Historical Article - April 1994 - Mincomp Musings

I attended a vintage race the other weekend and had the chance to talk to some of the Mini runners about many different subjects. The conversation started out talking about what was causing his Mini to get a little weird coming out of the fast turns. Of course there can be a whole lot of reasons for this, but this did lead our conversation towards "limited slip diffs".

Historical Article-August 1994-Steady Eddy

Steady Eddy My first visit to Mini Spares must have been over 12 years ago and while buying the usual go faster bits, I enquired about a Saturday job. A very lean and handsome Keith Calver could only offer me full time employment. I declined and subsequently have spent a small fortune over the years and drunk far too many pints of beer with K.C.

Historical Article-August 1994-Steady Eddy

Steady Eddy My first visit to Mini Spares must have been over 12 years ago and while buying the usual go faster bits, I enquired about a Saturday job. A very lean and handsome Keith Calver could only offer me full time employment. I declined and subsequently have spent a small fortune over the years and drunk far too many pints of beer with K.C.